FILTER BY TAG

Capture an Airline Payment

This section describes how to capture an airline payment.

Leg Limitations

TSYS Acquiring Solutions
limits the maximum number of legs for each trip based on card type.
You must include information for the first leg of the trip (leg 0), and you must use consecutive numbers for any additional legs. To do so, replace the
#
character in the field name with a sequential number starting with
0
. For example, for a trip with two legs, set the
airlineData_leg_#
field as
airlineData_leg_0
and
airlineData_leg_1
, for the first and second legs, respectively. If you skip a number,
Cybersource
ignores the legs that follow the skipped number.
This table describes the maximum number of legs for each trip based on card type.
TSYS Acquiring Solutions
Leg Limitations
Supported Card Types
Maxiumum Number of Travel Legs
American Express
9
Visa
4

Document Type

When capturing an airline payment, you must use the
airlineData_documentType
field to specify the purpose of the transaction. For all possible values, see Airline Document Type Codes.

Multiple Captures

TSYS Acquiring Solutions
allows you to request multiple partial captures for one authorization when using the Visa card type. You must ensure that the total amount for all captures does not exceed the authorized amount. For a list of the fields required for multiple captures, see Multiple Capture Fields for an Airline Payment.

Endpoint

Set the
ccCaptureService_run
field to
true
.
Send the request to
https://ics2ws.ic3.com/commerce/1.x/transactionProcessor
.

Required Fields for an Airline Capture

Include these required fields to capture an airline payment.
Set the value to the
merchant_ref_number
value used in corresponding authorization request.
Vero
supports Brazilian real (BRL) currency only.
Set the value to
airline
.
Replace the
#
character with the number
0
for the first leg and consecutive numbers for any additional legs.
Replace the
#
character with the number
0
for the first leg and consecutive numbers for any additional legs.
Replace the
#
character with the number
0
for the first leg and consecutive numbers for any additional legs.
Replace the
#
character with the number
0
for the first leg and consecutive numbers for any additional legs.
Replace the
#
character with the number
0
for the first leg and consecutive numbers for any additional legs.

Multiple Capture Fields for an Airline Payment

Include these fields in addition to the required fields when you are requesting multiple partial captures for a single airline payment.

Optional Fields for an Airline Capture

Simple Order Example: Airline Ticket Capture

Request
<requestMessage xmlns="urn:schemas-cybersource-com:transaction-data-1.11">    <merchantID>test-merchant</merchantID>    <merchantReferenceCode>R98TV09EN200W</merchantReferenceCode>    <purchaseTotals>       <currency>USD</currency>       <grandTotalAmount>204.78</grandTotalAmount>    </purchaseTotals>    <ccCaptureService run="true">       <authRequestID>0839543530000172034078</authRequestID>       <industryDatatype>airline</industryDatatype>    </ccCaptureService>    <airlineData>       <agentCode>98222147<agentCode>       <agentName>Regent Travel</agentName>       <ticketNumber>1234567890123450</ticketNumber>       <passengerName>John Smith</passengerName>       <leg id="0">          <carrierCode>VS</carrierCode>          <originatingAirportCode>GLA</originatingAirportCode>          <class>C</class>          <departureDate>080812</departureDate>          <destination>LGW</destination>       </leg>    </airlineData> </requestMessage>
Response
<replyMessage xmlns:c="urn:schemas-cybersource-com:transaction-data-1.124">    <requestID>0305782650000167905080</requestID>    <decision>ACCEPT</decision>    <reasonCode>100</reasonCode>    <merchantReferenceCode>R98TV09EN200W</merchantReferenceCode>    <purchaseTotals><currency>USD</currency></purchaseTotals>    <ccCaptureReply>       <reasonCode>100</reasonCode>       <amount>204.78</amount>       <reconciliationID>1094820975023470</reconciliationID>       <enhancedDataEnabled>y</enhancedDataEnabled>    </ccCaptureReply> </replyMessage>